|
|
Bill,
The dish is 2mm deeper and the holes could be redrilled and it looks like
it's 320mm as well! Less mucking around by getting the right one. I will
check on an RX8 to confirm your suspicions.
George
I have a flexplate that I suspect is an RX-8 unit, but I am not 100% sure.
Here is a picture.
It measures 1.350" from front to back surfaces. The bolt circle
for the torque converter is about 10.25" (too big).
Bill Dube'
At 12:33 AM 12/27/2005, you wrote:
> > Again Thanks Bob,
> >
> > I would suggest you hang on to this one for yourself. The RX-8
flexplate
> > won't work. (Ask me how I know.)
>
>Bill
>I'm asking - is it the diameter or the depth or both.
>I remember seeing the RX8 flexplate but can't recall what it looks like
>exactly - got a photo and dimensions?
>George (down under)
>
>
>
>
>--
>Homepage: http://www.flyrotary.com/
>Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
----------------------------------------------------------------------------
----
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|