For a race car, I would feel ok with a
soldered tank. For an airplane, I think I would either TIG, Oxy-acetylene
weld, braze, or silver solder it.
Mark S.
From: Rotary motors in
aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Lehanover@aol.com
Sent: Thursday, December 15, 2005
7:38 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Expansion
tank
In a message dated 12/15/2005 8:25:10 PM
Eastern Standard Time, dale.r@cox.net writes:
have a
propane torch bottle and the neck from a radiator. Does anyone see a
problem with using this? JohnD
>
That is what I used. So long as its
empty, there will be no problem. I soldered the neck on.
It has been on the race car for 6 years
now.