flyrotary@lancaironline.net Mailing List Archive

RE: [FlyRotary] LED on EC2 and Power from injectors

Todd,

The program button ( the one you push to store your new setting) has a red light/led in its push end. Sort of hard to see in direct daylight and a bit on the dim side, but unless your's is burned out it has one. I have had my EC2 for a bit over a year so we probably have the same model.

Ed Anderson

----- Original Message -----

From: Bartrim, Todd

To: Rotary motors in aircraft

Sent: Tuesday, August 19, 2003 1:16 PM

Subject: [FlyRotary] Re: LED on EC2 and Power from injectors

        What the heck are you guy's talking about? Mine doesn't have an LED on the program select or anywhere else for that matter. I've only had it for a little over a year, is this a feature on newer or older models? Anybody else not have one?

S. Todd Bartrim
Turbo 13B
RX-9endurance
C-FSTB
http://www3.telus.net/haywire/RV-9/C-FSTB.htm

        "Imagination is more important than knowledge"
                                        -Albert Einstein

-----Original Message-----
From:   David Leonard [SMTP:Daveleonard@cox.net]
Sent:   Tuesday, August 19, 2003 7:40 AM
To:     Rotary motors in aircraft
Subject:        [FlyRotary] LED on EC2 and Power from injectors

When I power up my EC2 the program select button glows red. I am hoping that this is normal - although green would have been a more re-assuring color. The interesting thing is that when I supply power to the main buss (but not the EC2) the LED also glows red. Is this normal? The juice is getting to the EC2 via the injectors (which are powered by the main buss). If I unplug the injectors the LED goes out. Seems strange, but I'm hoping everything is OK and hope I don't have to start re-wiring.

David Leonard

The Rotary Roster:

<http://members.aol.com/_ht_a/rotaryroster/index.html>