BTW,
can't remember if you have ever updated your software but since you are a
pioneer user of the 20B version, you can have a freebie update to the
latest version any time you want. There have been a ton of improvements
to it.
I appreciate that; Tracy. Mine was
updated 11/04 according to the date on the cover. Should it be updated
again? What’s involved – installing a new chip? Does it
mean setting the mixture correction table again?
BTW; is the “auto tune”
available for the 20B? Does auto-tune use output from the O2 sensor?
I'm
still trying to come up with a good answer for the lack of a good manifold
pressure tap on intake systems with no plenum like yours. Manifold
pressure at high throttle will always be sensed as lower than
actual due to the high velocity in the runner (Bernoulli stuff is
really true
I’m not sure I understand
that it is a problem. As long as the mixture is set right for a given
sensed MAP, what’s the difference? I haven’t noted that it is
an issue; or is that because I have only run on the ground.
Al