|
Bill,
I feel as you do as well, have suggested this to Kelly, especially in
regard the outer "O" ring. The inner one is about 77% and should be
OK - will have to await the results from Creavy.
George
I'm actually using Cosmo Rotor housings with
the grooves in the Rotor Housings for the single rotor, as I'm using 12A
endhousings - in the event anyone was confused with my photo.
George ( down
under)
George,
Those o-rings look waaay big for the groove, reguardless of the ID. Even
if silicone doesn't expand the rings shown look like they fill the groove to
the point of solid lock, (read very bad). there must be some space in the
groove AFTER assembly.
Bill Jepson
|