|
Message
Don't worry Rusty were here for
you when you need help!
You're going to need to learn
to use those smiley things when you're joking like this
:-)
BTW, I'm with Bill on the
ports. I only looked at the inside, since that's where the hole actually
is. I stood a straight edge up on the leading, and trailing edge, and
found them to be the same. I measured the width, which is also the
same. There's certainly a possibility that Mazda made some housings
that were different, but I'm only familiar with
'86-'95.
Another interesting thing, which I
almost hesitate to mention, is that there are folks who are trying to make
a small PP in addition to the side ports. Being small, the
overlap can be kept easily in check, and it increases the airflow at high
rpms. Interesting idea, but I'll pass for now
:-)
Cheers,
Rusty (EFIS install in
progress)
|