|
Hi all,
would a 3 mm "Tracy-seal" that tappers off to 2 mm have
any merrit?
Supposedly the 3 mm don't seal the part the 2 mm
do.
So why not have the rotors milled for 3 mm and use seals
that have a base/foot of 3 mm - as soon as they leave the rotor they tapper back
to 2 mm for better sealing (smaller radius on top? Apex seals are radiused on
the sealing side?)
Just speculating as I have no experience with
this.
What causes the lesser sealing of the 3 mm? Less flex for
the whole seal or the bigger radius? Or....?
Thomas Jakits
|