Does anyone know what Bruce Turrentine changed between his first and
second edition?

Barry Gardner  (proud owner of a 1st edition video but about to dig into
his engine and wondering what Bruce revised...)
Wheaton, IL

Dean wrote:

> Ed
>
> We certainly appreciate your efforts in generating this transcript.  I
> have Bruce's 2nd edition video.  Perhaps I am the only one having this
> problem in printing it out.  The first 3 pages print out OK. After
> that, there are a number of single lines that are individually
> underlined with a dotted line.  Each of those divider lines causes one
> line to be printed out on a full sheet of paper, which would require
> 40 sheets for the full transcript if I let the printer run.
>
> Best Regards
> Dean Van Winkle
> RV-9A  Fuselage/Finish   13B/RD-1B/EC2/EM2
>
>     ----- Original Message -----
>     *From:* Ed Anderson <mailto:eanderson@carolina.rr.com>
>     *To:* Rotary motors in aircraft <mailto:flyrotary@lancaironline.net>
>     *Sent:* Sunday, April 17, 2005 6:46 PM
>     *Subject:* [FlyRotary] 13B Overhaul Steps
>
>     Attached is a transcript of the video Bruce T  made back a few
>     years ago (a newer version is out) for overhauling the 13B.  I the
>     video quite useful as it answered lots of things not in the
>     workshop manuals.  In any case, I had laptop in lap and sat in bed
>     several nights copying what Bruce was saying as a written
>     reference for out in the shop when working.
>
>     No assertion is make as to accuracy or spelling {:>), but you may
>     find it useful should you ever decide to tear into one.
>
>     Best Regards
>
>     Ed
>
>     Ed Anderson
>     Rv-6A N494BW Rotary Powered
>     Matthews, NC
>     eanderson@carolina.rr.com <mailto:eanderson@carolina.rr.com>
>

>     >>  Homepage:  http://www.flyrotary.com/
>     >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html