Got a picture Mark?
Bill Schertz
KIS Cruiser # 4045
----- Original Message ----- From: "Mark R Steitle" <mark.steitle@austin.utexas.edu>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, April 18, 2005 1:08 PM
Subject: [FlyRotary] Re: flyrotary_Web_Archive


Ernest,
I built a filter box for my Lancair ES using a similar design
(flat-pleated filter) for Ford 5.0 HO application.  Without realizing
it, I have designed in a trap to separate larger particles as you have
described.  It also has a flap for ram air at higher altitudes & speeds.
I carved the mold out of blue foam, then glassed over it.  Once cured, I
removed the foam.  Probably not a task for the fiberglass challenged
builder, but not all that difficult to do either.  Mark S.  /List.html