Mailing List flyrotary@lancaironline.net Message #11978
From: jesse farr <jesse@jessfarr.com>
Subject: Re: [FlyRotary] No Start 13B
Date: Wed, 6 Oct 2004 11:23:35 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Message
Like you have recently noticed, squirt in auto tansmission fluid, crank over few times, replace cleaned plugs, crank and get running; if can't with starter, be sure plugs are clean and pull off, then dribble trans fluid in through intake.  Not only does it clean out all the mosquitos in neighborhood, it will free up rotor seals and let's you start over again, sometimes as good as new.  You might even try power blast and/or pwer foam, never tried so don't know there. 
jesse farr, soddy tn
----- Original Message ----- From: Thomas Phy

Help, I made the mistake of starting my 91 rx 7 up, put it in the garage, shut it down. Thats it! went to start her up the next day, flooded! Pulled the plugs cleaned them up (almost new), Now it spins over with absollutly no compression!!!  (Yes I put the plugs back in) Ran great until now, Any suggestions???
Thomas  ( RV-7 Wings)
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster