From: RWolf99@aol.com
Message-ID: <db.11668e07.27dd3278@aol.com>
Date: Sun, 11 Mar 2001 14:56:40 EST
Subject: Oil Cooler Air Inlet (LNC2)
To: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
I'm undecided about getting air for my 360-powered LNC2 from a NACA duct on 
the starboard side of the lower cowl or taking it off the aft baffling by the 
#3 cylinder.  I'd prefer to take it off the baffling if I could be certain of 
adequate cylinder cooling.

I'd like to get comments, particularly from 360 drivers who take air off the 
baffling and have or don't have cooling problems.  (I'm assuming that those 
of you with NACA scoops don't have cooling problems on the #3 cylinder 
specifically.) 

I'd also be interested in comments from 320 drivers who take air off the 
baffling and have cooling problems.  (I'm assuming that the extra 12.5% power 
of a 360 results in 12.5% more heat, thus an adequately cooled 320 
configuration is no guarantee that it will work in a 360.)

Thanks.

- Rob Wolf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>