Return-Path: Received: from spknpop1.spkn.uswest.net ([207.108.48.1]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-70783U4500L450S0V35) with SMTP id com for ; Fri, 9 Mar 2001 20:44:42 -0500 Received: (qmail 28109 invoked by uid 0); 10 Mar 2001 01:53:16 -0000 Received: from spkndslgw3poola114.spkn.uswest.net (HELO qwest.net) (63.227.96.114) by spknpop1.spkn.uswest.net with SMTP; 10 Mar 2001 01:53:16 -0000 Message-ID: <3AA9873D.E9E8BA77@qwest.net> Date: Fri, 09 Mar 2001 17:45:33 -0800 From: Curtis Krouse To: lancair.list@olsusa.com Subject: Re: Drill bit holder bushing References: X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Claudio, Someone on the list here gave me a tip a couple years ago which I have used several times and it seems to work very well. Use a 2x4 or any chunk of construction wood and drill a perpendicular hole through it. Trim it down to the size you need and use the hole as a guide. Needless to say, you may have to discard it after a couple tough holes as the guide hole will widen, but it works great. Curtis Krouse N753K > Does anybody know where I can buy a drill bit holder bushing. I have to > drill holes and they have to be as perpendicular as possible. There is a > drill guide available in the local hardware store but it is too big and > bulky for this job. Thanks. > > Claudio Garcias LC2 > Jacksonville, FL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>