Return-Path: Received: from sphmgaae.compuserve.com ([149.174.177.154]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-70783U4500L450S0V35) with ESMTP id com for ; Sat, 3 Mar 2001 11:13:51 -0500 Received: (from mailgate@localhost) by sphmgaae.compuserve.com (8.9.3/8.9.3/SUN-1.9) id LAA23976 for lancair.list@olsusa.com; Sat, 3 Mar 2001 11:22:42 -0500 (EST) Date: Sat, 3 Mar 2001 11:22:13 -0500 From: John Kleber & Annette Worthington <73761.230@compuserve.com> Subject: Power Tools Sender: John Kleber & Annette Worthington <73761.230@compuserve.com> To: Lancair List Message-ID: <200103031122_MC2-C77D-17FC@compuserve.com> X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> I have recently begun construction of a carbon fiber Legacy. So far I have burned up a Dremel motor and an electric-powered orbital sander. Apparantly, the cooling system for these power tools is pulling in the carbon dust and shorting out the motors. I have replaced the Dremel with an air-driven mini die grinder. It's perfect since it is cooled with the air from the compresssor. I have also purchased a cordless Dremel, which does not pull air into the motor. I'd like to replace my orbital sander with a pneumatic orbital sander which takes the standard 32/3" X 71/4" adhesive-backed sanding sheets. If you have any recommendations including make, model #, and place to purchase, please post them to this list or send an email to me directly at: 73761.230@compuserve.com Thank You, John Kleber Legacy N83JK >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>