Mailing List lml@lancaironline.net Message #8614
From: <RandyKru@aol.com>
Subject: Re: Brake Bleeder Pressure Pots
Date: Mon, 19 Feb 2001 16:10:20 EST
To: <lancair.list@olsusa.com>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

In regards to air bubbles in the Hudson type sprayer pressure pots I had a similar problem where after bleeding my lines I would find small bubbles the next day.  I learned that it was the result of tiny bubbles of air introduced from the pot but so small you could not see them until the next day when they collected into a larger bubble at a high point.  I found that if I pump the sprayer up the night before then use it the next day this would not be a problem.  the air injected will raise to the top of the  brake fluid after sitting over night.

Randy Kruger
LNC2, N1222K

LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster