Return-Path: Received: from tomts5-srv.bellnexxia.net ([209.226.175.25]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with ESMTP id com for ; Wed, 15 Nov 2000 12:52:15 -0500 Received: from default ([64.229.10.111]) by tomts5-srv.bellnexxia.net (InterMail vM.4.01.03.00 201-229-121) with SMTP id <20001115175953.UVFE18376.tomts5-srv.bellnexxia.net@default> for ; Wed, 15 Nov 2000 12:59:53 -0500 Message-ID: <008101c04f2e$288ea1e0$dc08e540@default> From: "Ian B. Crowe" To: "Marvin Kaye" Subject: Fittings for pressure switches/transmitters. Date: Wed, 15 Nov 2000 13:02:02 -0500 Organization: Corvi Trade Consultants Inc X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> HELP! Pressure switches and pressure transmitters for lub oil, Hobbs meters et al all seem to have a 1/8" pipe thread coming out of the unit. The feed to these units is normally a 3/16" hose with a 37degree JIC flare. I have been totally unable to find a fitting to go from the the 1/8"male pipe thread to the 3/16" flare. What have other people done here? Any A & P types have any ideas? Regards Ian Crowe. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>