Return-Path: Received: from nbo-mail-2.firstar.com ([207.250.44.18]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with ESMTP id com for ; Wed, 18 Oct 2000 14:11:19 -0400 Received: from nbo-mail-1.fsrbank.com (nbo-mail-1.fsrbank.com [10.40.3.64]) by nbo-mail-2.firstar.com (8.11.0/8.11.0) with ESMTP id e9IIKg212627 for ; Wed, 18 Oct 2000 13:20:43 -0500 (CDT) Received: from mail.firstar.com (figs.fsrbank.com [111.1.6.1]) by nbo-mail-1.fsrbank.com (8.11.0/8.11.0) with SMTP id e9IIIDw25910 for ; Wed, 18 Oct 2000 13:18:13 -0500 (CDT) Received: by mail.firstar.com(Lotus SMTP MTA v4.6.5 (863.2 5-20-1999)) id 8625697C.0064EBF3 ; Wed, 18 Oct 2000 13:22:19 -0500 From: Theo_Green@firstar.com To: lancair.list@olsusa.com Message-ID: <8625697C.0064E990.00@mail.firstar.com> Date: Wed, 18 Oct 2000 13:19:03 -0500 Subject: Re: Electronic Ignition System X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> <> Speaking of which, does anyone know where I can get a 20', 4 conductor, shielded run (ala S-Tec servo wire) for my roll servo? ACS sells 2 and 3 wire runs, but not 4 wire. S-Tec wants a few hundred for the install kit, so I'm growing my own. Being an experimental is pretty cool sometimes... The cable connector is a pretty standard DB-9 and it's made by Positronic. So unless it's proprietary, I should be able to get that from the manufacturer. I didn't measure the wire, but I think it's 20 or 22 ga. Everthing else in the install kit I fabricated, so I'm just left with wire. Oh, I also need a 14volt roll servo -- details. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>