<x-flowed>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

<<1) Why can't you use the 10-32 threaded end prop cable with the two place
Lancairs?  I'll have an IO-360 with either a McCauley or MT prop governor,
located back by the magnetos, with a long engine mount.>>

Rob,
I used a 10-32 threaded end cable for the prop on my IO-360. My prop governor is in the back, and I,m using the one Vern has for the 360 (McCauley) with the long mount. You have to make a aluminum bracket that mounts on the back of the governor, but you need to do this anyway. I would install the threaded version.

By the way, when I started to work out the routing of the cable for my prop governor, the control arm was not in a good position for the route I wanted the cable to take. I found out from American Propeller that you can loosen the 6 screws on the back plate and rotate the arm to a different clock position without disturbing the governor setting.

Mike Reinath
N3602M

LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.

</x-flowed>