Return-Path: <lancair.list-request@olsusa.com>
Received: from imo-d08.mx.aol.com ([205.188.157.40]) by ns1.olsusa.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35)
          with ESMTP id com for <lancair.list@olsusa.com>;
          Sat, 14 Oct 2000 12:32:15 -0400
Received: from RWolf99@aol.com
	by imo-d08.mx.aol.com (mail_out_v28.31.) id k.26.bf9d288 (4260)
	 for <lancair.list@olsusa.com>; Sat, 14 Oct 2000 12:38:15 -0400 (EDT)
From: RWolf99@aol.com
Message-ID: <26.bf9d288.2719e5f7@aol.com>
Date: Sat, 14 Oct 2000 12:38:15 EDT
Subject: Re:  Oil Cooler Sizing
To: lancair.list@olsusa.com
X-Mailing-List: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>

In a message dated 10/13/0 10:41:42 PM, Ian Crowe wrote:

<<I have researched the archives to find the part number that I should use for
the oil cooler on my 360.  I have a Lycoming 200hp IO360 A3B6.  It seems
that a Positech #4215 should do the trick.>>

Ian -

When I asked Orin this same question, he said the Positech 4215 (or Stewart 
Warner equivalent) was the one to use.  However, my question was for an 
IO-360-B1F at 180 HP.

- Rob Wolf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>