<x-flowed>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

The 360 std. build manual says to use -6 size hose from the engine-driven fuel pump to the fuel injection servo. My Bendix servo has a -4 size input fitting, however. I called Precision Airmotive (sp?) to see if I could get a -6 size input fitting. They said that the -4 input fitting is the only one made for this servo. I can use a couple of Parker steel fittings as an adaptor for the -6 sized hose. These two fittings are a bit bulky, and I was wondering if anyone has a better way. (By the way, Parker makes a nice, compact reducer fitting to go from -6 to -4, but there is no equivalent increaser fitting to go the other way. You can download a PDF version of their catalog at http://www.parker.com/tfd/)

Mike Reinath
Std. Build 360 MKII 90%
N3602M

LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.

</x-flowed>