Mailing List lml@lancaironline.net Message #68484
From: Paul Miller <pjdmiller@gmail.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Gap Seals
Date: Tue, 10 Dec 2013 09:55:18 -0500
To: <lml@lancaironline.net>
Steve, that's my problem on my Legacy.  I just noticed I've got some fore/aft play in the flaps when UP, so I checked that gap and it is almost 1/4 inch at the leading edge of the flap inside that pocket.  The other flap is tighter.  Wouldn't a gap seal tape on the bottom of the wing be more efficient than plugging the gap inside?   

Paul
On 2013-12-10, at 8:39 AM, "Steve Colwell" <mcmess1919@yahoo.com> wrote:

OK Doug, here’s another 4 for you.  Put Home Depot Compressible Foam Tape in the wing trailing edge flap pocket.  I have been planning to do this but just haven’t got around to it.  Put in 8 more “tricks” and you are up 40 KNOTS!  Don’t laugh you guys, Lee Behel did it at Reno.
 
Steve Colwell
 
From: Lancair Mailing List [mailto:lml@lancaironline.net]On Behalf Of Douglas Brunner

 
Any bets on the improvement with gap seals, etc?  I am guessing 4 knots.
 
D. Brunner
N241DB 700 hrs

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster