Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Mon, 09 Dec 2013 07:46:46 -0500
Message-ID: <redirect-6631346@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=207.115.11.56; envelope-from=bbradburry@bellsouth.net
From: "Bill Bradburry" <bbradburry@bellsouth.net>
References: <list-6630592@logan.com>
In-Reply-To: <list-6630592@logan.com>
Subject: RE: [LML] Sky-Tec starter
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Thread-Index: Ac70JpEPk7+y5nUIQICh/f/TxURCaAABefhw

Angier,

Check your wiring and grounds to and from the starter.  Clean all the
terminals.

Bill 

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Greenbacks, UnLtd.
Sent: Sunday, December 08, 2013 10:02 AM
To: List Lancair Mailing
Subject: [LML] Sky-Tec starter

My Lycoming IO360 180hp was delivered with a Sky-Tec starter and I'm
beginning to wonder about
possible failure modes. Can they slowly lose their ability to produce torque
over time? I had two Odyessey batteries
that were at least four years old when the engine was first started and
either battery would spin the prop so fast it was a blur.
Slowly over time the prop would turn over more slowly. It would not stop on
the first compression stroke but would slow
down significantly. The batteries tested OK but I replaced them all the
same. I am still experiencing the same
condition so am beginning to focus on the starter.

Suggestions?

Thanks,

Angier Ames
N4ZQ
92hrs


--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html