Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Fri, 08 Nov 2013 11:55:49 -0500
Message-ID: <redirect-6582003@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=17.158.58.246; envelope-from=gw5@me.com
Subject: Re: [LML] Leaking door hinges
References: <list-6579142@logan.com>
From: George Wehrung <gw5@me.com>
Content-type: text/plain; charset=us-ascii
In-reply-to: <list-6579142@logan.com>
Content-transfer-encoding: quoted-printable
MIME-version: 1.0 (1.0)

Pete,

Would you be kind enough to send a pic of your dams?

George

Sent from my iPad

On Nov 6, 2013, at 13:25, "pete@leapfrogventures.com" <pete@leapfrogventures=
.com> wrote:

> George,
>=20
> Put a dam across the hinge openings on the side facing the door.  The dam b=
oth provides a larger surface for the door seal to press against, and elimin=
ates water pouring into the cabin when the seal is deflated if there is resi=
dual water in the hinge recess.  I believe the front dam can be almost full h=
eight, but the rear dam needs to be a bit lower due to interference with the=
 hinge nuts.  I replaced the nuts for the hinge that were directly above the=
 dam with low profile nuts to allow a higher dam. =20
>=20
> Pete
>=20
> -----Original Message-----
> From: George Wehrung [mailto:gw5@me.com]=20
> Sent: Wednesday, November 06, 2013 9:11 AM
> To: lml@lancaironline.net
> Subject: My door pics
>=20
> Here a few door pics
>=20
>=20
> --
> For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.htm=
l