X-Virus-Scanned: clean according to Sophos on Logan.com
Return-Path: <marv@lancaironline.net>
Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Mon, 09 Sep 2013 07:54:44 -0400
Message-ID: <redirect-6459882@logan.com>
X-Original-Return-Path: <hackmo15@gmail.com>
Received: from mail-wi0-f172.google.com ([209.85.212.172] verified)
  by logan.com (CommuniGate Pro SMTP 6.0.6)
  with ESMTPS id 6459301 for lml@lancaironline.net; Sun, 08 Sep 2013 12:47:40 -0400
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.212.172; envelope-from=hackmo15@gmail.com
Received: by mail-wi0-f172.google.com with SMTP id c10so2533525wiw.11
        for <lml@lancaironline.net>; Sun, 08 Sep 2013 09:47:05 -0700 (PDT)
MIME-Version: 1.0
X-Received: by 10.180.208.97 with SMTP id md1mr5486856wic.41.1378658825220;
 Sun, 08 Sep 2013 09:47:05 -0700 (PDT)
Received: by 10.194.103.41 with HTTP; Sun, 8 Sep 2013 09:47:05 -0700 (PDT)
X-Original-Date: Sun, 8 Sep 2013 09:47:05 -0700
X-Original-Message-ID: <CAEFKvnwou35BRWDRS+uMj+ZGbODG8kh-+i_Tx6EJq_06P7OTsw@mail.gmail.com>
Subject: Re: Apollo/Garmin SL30 & MX20 & MX200
From: Jon Hadlich <hackmo15@gmail.com>
X-Original-To: lml@lancaironline.net
Content-Type: multipart/alternative; boundary=001a11c339048b393904e5e20533

--001a11c339048b393904e5e20533
Content-Type: text/plain; charset=ISO-8859-1

so, on the bench it works fine, in the airplane it doesn't work? Run a new
wire paying attention to the pin out and the serial ground. Don't use the
shield for the serial ground, use 3 conductor for rx,tx gnd.
If you're using the serial from the sl 30 for anything else , (grt. afs
efis?) this might also be causing a problem.  Disconnect and try the MX 20.


-- 
Jon Hadlich
AI Systems
(541) 815-7381

--001a11c339048b393904e5e20533
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr"><div>so, on the bench it works fine, in the airplane it do=
esn&#39;t work? Run a new wire paying attention to the pin out and the seri=
al ground. Don&#39;t use the shield for the serial ground, use 3 conductor =
for rx,tx gnd.=A0 <br>
</div><div>If you&#39;re using the serial from the sl 30 for anything else =
, (grt. afs efis?) this might also be causing a problem.=A0 Disconnect and =
try the MX 20.<br></div><br clear=3D"all"><div><div><br>-- <br>Jon Hadlich<=
br>
AI Systems<br>(541) 815-7381
</div></div></div>

--001a11c339048b393904e5e20533--