|
|
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
<< Lancair Builders' Mail List >>
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
Message text written by INTERNET:lancair.list@olsusa.com
I hate the thought of changing the cables and/or guides, but this may be
the only solution. Any suggestions?<
I screwed up by not lubricating the rudder cables when they were installed.
I ordered some teflon lubricant on the recommendation of others but have
not gotten around to trying it out. Removing my cables to lub them is a
job that I have not had time to accomplish. I too would appreciate any
comments. Has anybody had any luck trying to lube the cables without
removal?
I have noticed that the friction in the rudder system increases
dramatically as the tension on the cables is increased. For example, too
tight a spring system pulling the rudders forward or lightly pushing on
both rudder pedals at the same time will cause undesirable friction which I
have learned to tolerate. Jim Frantz
LML website: http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore: http://www.buildersbooks.com/lancair
Please send your photos and drawings to marvkaye@olsusa.com.
|
|