X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Wed, 12 Jun 2013 09:35:56 -0400 Message-ID: X-Original-Return-Path: Received: from carbinge.com ([69.5.27.218] verified) by logan.com (CommuniGate Pro SMTP 6.0.5) with SMTP id 6320387 for lml@lancaironline.net; Wed, 12 Jun 2013 01:21:24 -0400 Received-SPF: none receiver=logan.com; client-ip=69.5.27.218; envelope-from=jbarrett@carbinge.com Received: (qmail 7378 invoked from network); 12 Jun 2013 05:20:49 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; h=X-Originating-IP:Reply-To:From:To:Subject:Date:Message-ID:MIME-Version:Content-Type:X-Mailer:Thread-Index:Content-Language; s=default; d=carbinge.com; b=E6l7/gg6ndnVgIqIEZC2r1GD+0aHrfU1c0LLckp1M5q1DSS6A9GlfZZUaCRRfQRB0HMnDBI2ORFuBcR0KBDjPigOG9e8hnMsRjMPwHO2ziDBXEupbqO6W+yExCkCYK6+qcCGoRvkEIPHZuRJOgaPlEABO/FVwwoXtHjUXyxydn0=; X-Originating-IP: [24.56.209.218] Reply-To: From: "John Barrett" X-Original-To: "'Lancair Mailing List'" Subject: EGT on runup X-Original-Date: Tue, 11 Jun 2013 22:20:49 -0700 X-Original-Message-ID: <021701ce672c$9a04a260$ce0de720$@com> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0218_01CE66F1.EDA5CA60" X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: Ac5nLJlYMt6zpgP8QbG4C2IEC8+Mpg== Content-Language: en-us This is a multi-part message in MIME format. ------=_NextPart_000_0218_01CE66F1.EDA5CA60 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hello all, Hope you don't mind I may be a pain in the butt for a while. I'm breaking in this new Barrett Precision Engines TSIO 550 and hope some of you won't mind answering niggling questions that will come up as I go through the process. I have about 6.5 hours on it now and the CHT's are coming down nicely. Still running full rich and cycling the power in cruise from about 33 inches MAP down to 25" in gradual increments. Today I got to 12,500 and stayed there about an hour with CHT's never going to 400 and after the initial climb and level off, they stayed below 380. Previous flights, I could not seem to keep #3 below 400 above about 10,000 ft, even when powering back. So it looks like the rings are seating well and break in is on track. I did notice one thing that I don't recall seeing before during engine run up before takeoff. The EGT's all went to caution temps when I switched to the MAG at 1700 RPM. The drop on the MAG has been a bit high - usually over 100 RPM and inconsistent. Sometimes it could be 95 RPM and it has been as high as 145 RPM. Today I think it was close to the higher number. I have the EGT caution warning go off at 1475. I know that's not particularly high but it's the first time bitching Betty has gone ballistic six times in a row in short order like that. As expected there is no drop on the Lightspeed ignition and the EGT's don't seem to change much when selecting only that ignition source. Any thoughts on that? Regards, John Barrett, CEO Leading Edge Composites PO Box 428 Port Hadlock, WA 98339 www.carbinge.com ------=_NextPart_000_0218_01CE66F1.EDA5CA60 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Hello = all,

 

Hope you don’t mind I may be a pain in the butt = for a  while.  I’m breaking in this new Barrett = Precision Engines  TSIO 550 and hope some of you won’t mind = answering niggling questions that will come up as I go through the = process.  I have about 6.5 hours on it now and the CHT’s are = coming down nicely.  Still running full rich and cycling the power = in cruise from about 33 inches MAP down to 25” in gradual = increments.  Today I got to 12,500 and stayed there about an hour = with CHT’s never going to 400 and after the initial climb and = level off, they stayed below 380.  Previous flights, I could not = seem to keep #3 below 400 above about 10,000 ft, even when powering = back.  So it looks like the rings are seating well and break in is = on track.

 

I did notice one thing that I don’t recall = seeing before during engine run up before takeoff.  The EGT’s = all went to caution temps when I switched to the MAG at 1700 RPM.  = The drop on the MAG has been a bit high – usually over 100 RPM and = inconsistent.  Sometimes it could be 95 RPM and it has been as high = as 145 RPM.  Today I think   it was close to the higher = number.  I have the EGT caution warning go off at 1475.  I = know that’s not particularly high but it’s the first time = bitching Betty has gone ballistic six times in a row in short order like = that.  As expected there is no drop on the Lightspeed ignition and = the EGT’s don’t seem to change much when selecting only that = ignition source.

 

Any thoughts = on that?

 

Regards,

 

John = Barrett, CEO

Leading Edge = Composites

PO Box = 428

Port Hadlock, WA = 98339

 

www.carbinge.com

 

------=_NextPart_000_0218_01CE66F1.EDA5CA60--