|
|
Jack,
with my AeroComposites prop and a McCauley hub the high speed setting is adjustable but the low speed just stops at hard stops on the hub and is not adjustable. I had my low pitch changed from 9° to 10°. My high pitch can not be adjusted.
Lorn
From: J H Webb <airmale4@yahoo.com>
Date: May 31, 2012 8:06:57 AM EDT
Steve,
Your high pitch blade angle is set too low(too small a bite at the high pitch stop). To change it you need a visit to a prop shop but it is a somewhat minor repair.
Jack Webb
L360 LIV
Years as Engineering Flight Test Pilot
From: steve <n5276j@aol.com>
Sent: Tuesday, May 29, 2012 11:09 AM
Hi All. Got a question for 360 flyers with over 200HP and the Hartzell prop with 68" blades. I need to know if you guys with the higher HP can bring your RPM's down to say 2000 or so while running full throttle at alitude of 12,000 to 17,500. I have to pull back power in order to bring the rpms down at alitude of 12,000 +. steve alderman 360
--
Lorn H. 'Feathers' Olsen, MAA, ASMEL, ASES, Comm, Inst
DynaComm, Corp., 248-345-0500, mailto:lorn@dynacomm.us
LNC2, FB90/92, O-320-D1F, 1,800 hrs, N31161, Y47, SE Michigan
|
|