Return-Path: Received: from sphmgaad.compuserve.com ([149.174.177.149]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with ESMTP id com for ; Sun, 30 Jul 2000 11:10:46 -0400 Received: (from mailgate@localhost) by sphmgaad.compuserve.com (8.9.3/8.9.3/SUN-1.9) id LAA27825 for lancair.list@olsusa.com; Sun, 30 Jul 2000 11:17:11 -0400 (EDT) Date: Sun, 30 Jul 2000 11:16:55 -0400 From: Dr Michael A Fopp <70734.101@compuserve.com> Subject: Flap Malfunction Sender: Dr Michael A Fopp <70734.101@compuserve.com> To: Lancair List Message-ID: <200007301117_MC2-ADF0-C990@compuserve.com> X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Dear All, I've got about 5 hours on my 320 now but during the last two flights I have been unable to get the flaps down. After the first incident I traced all the wiring and changed the relays. Today it happened again. On each occasion the flap motor circuit breaker pops, I land flapless and re-set the cb on the ground. I then find that the down relay fails to make a circuit and the flaps will not come down. The up relay clicks but, because the flaps are up, no movement. Pre-flight checks on both occasions showed the flaps going up and down fine and taking them up after take-off was not a problem. Could it be that the air loads have an affect? I'm running out of ideas but they worked fine for the first four flights. I've also got leaking hydraulic cylinders on my main gear and need to obtain a re-build kit for the old ARO TEK cylinders (ie. not the newer Matco type) - anyone know of a source please? Michael Dr Michael A Fopp Home Office at 16:17 on 30-Jul-00 Private email add:- michael_fopp@compuserve.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>