Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Mon, 24 Oct 2011 10:18:44 -0400
Message-ID: <redirect-5170931@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.215.180; envelope-from=doramsey@gmail.com
MIME-Version: 1.0
Subject: connections for nose gear limit switch
From: Dennis Ramsey <doramsey@gmail.com>
Content-Type: multipart/alternative; boundary=0015174c3da8382d3e04b00bc7a5

--0015174c3da8382d3e04b00bc7a5
Content-Type: text/plain; charset=ISO-8859-1

I am at the point of wiring up the nose gear limit switch on my IV and was
looking at options for those tiny posts.  Definitely too small for a crimp
on.  A female molex is too big.   The female D-sub pins I have seem too
small.     Did a search in the archives and did not find anything.   So what
did folks do to connect to that itty bitty limit switch.  Did you simply
solder it?  If so, did the heat damage the limit switch?

--0015174c3da8382d3e04b00bc7a5
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

<p>I am at the point of wiring up the nose gear limit switch on my IV and w=
as looking at options for those tiny posts.=A0 Definitely too small for a c=
rimp on.=A0 A female molex is too big.=A0=A0 The female D-sub pins I have s=
eem too small.=A0=A0=A0=A0 Did a search in the archives and did not find an=
ything.=A0=A0 So what did folks do to connect to that itty bitty limit swit=
ch.=A0 Did you simply solder it?=A0 If so, did the heat damage the limit sw=
itch?</p>

--0015174c3da8382d3e04b00bc7a5--