Return-Path: <lancair.list-request@olsusa.com>
Received: from smtppop3.gte.net ([206.46.170.22]) by ns1.olsusa.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35)
          with ESMTP id com for <lancair.list@olsusa.com>;
          Wed, 28 Jun 2000 22:33:29 -0400
Received: from GLAUSER (ca.216.202.160.247.gtecablemodem.com [216.202.160.247])
	by smtppop3.gte.net  with SMTP
	for <lancair.list@olsusa.com>; id VAA8084955
	Wed, 28 Jun 2000 21:39:06 -0500 (CDT)
Message-Id: <200006290239.VAA8084955@smtppop3.gte.net>
Date: Wed, 28 Jun 2000 19:38:31 -0800
From: David Glauser <glausers@gte.net>
Reply-To: glausers@gte.net
Reply-To: lancair.list@olsusa.com
To: "lancair.list@olsusa.com" <lancair.list@olsusa.com>
Subject: Re: Cutting Table Surface & Workshop Tips
X-Mailing-List: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
At 6/28/00 16:15:00, Rob Wolf wrote:

<bunch of good stuff snipped>

> Use the metal pizza roller from Lancair for cutting wet glass, 
> and store it in a jar containing methylene chloride 
> after you finish the layup, but before the fiberglass sets up.

I've been using white vinegar to clean up after my epoxy - works really well and doesn't smell 
horrible (if you like vinegar on your chips). I keep a plastic Tupperware-type container next to 
the work area and throw used squeegees, scissors, etc. into it after use. The next day I wipe them 
down and they're ready to go.

I found out the hard way that you can't do that with a pizza cutter. I had the plastic-handled one 
from Aircraft Spruce, and the blade completely disolved into a black sludge. Be warned. Otherwise, 
vinegar & water makes a great cleanup solution.

David

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>