Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Wed, 16 Feb 2011 07:53:54 -0500
Message-ID: <redirect-4872191@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=72.9.254.67; envelope-from=paul@tbm700.com
From: paul miller <paul@tbm700.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable
Subject: follow up on Legacy pitch trim speed
Mime-Version: 1.0 (Apple Message framework v1082)

Determined a properly setup 12v trim will take about 30 seconds full up =
to full down in a Legacy. That sounds about right and Ed Martin's Legacy =
here is working the right way. Mine and others at 6 seconds means that =
you have about 3 seconds from level flight to full deflection in a =
runaway.  That's not enough to activate the safety cutout or manually =
find a disconnect.  On a night approach or close to the ground that just =
isn't going to be detectable before things go wrong.  So, I'm still =
looking for the right wiring, I had my panel wired by Lancair Avionics =
but the box that controls the trim has no label and the pot that is =
supposed to control speed only stops the pitch trim so it isn't working =
properly.  We'll get it right but 6 seconds isn't safe imo.

Paul
Legacy 186
Spruce Creek=