Mailing List lml@lancaironline.net Message #57440
From: Steve Colwell <mcmess1919@yahoo.com>
Sender: <marv@lancaironline.net>
Subject: LNC2 Jacks
Date: Sun, 06 Feb 2011 18:04:09 -0500
To: <lml@lancaironline.net>

Uh Oh, better measure the jack clearance for any aircraft BEFORE you buy or build.

Steve

 

From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Wolfgang

 

That unit has a minimum height of 26"

You sure it's going to fit under the wing ?

 

Wolfgang

 

----- Original Message -----

 

Most of us are do-it-yourself kind of guys so I see the appeal of building something that looks easy and would save a few bucks.  Considering the experimental angle, (might work fine, might not).   I bought a pair of model 326 jacks from http://aircraftjacks.com/   for $179.00 each.  They are very stable, easy to operate, have locking collars and are light enough to pick up and carry around easily. 

 

I rationalized the purchase as: A. One more thing I would not have to build before first flight and  B. Reduced the possibility of putting a 4” diameter drain in a fuel tank.  

 

Steve Colwell   Legacy

 



 

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster