Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Mon, 15 Nov 2010 07:30:42 -0500
Message-ID: <redirect-4579394@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=76.96.59.228; envelope-from=mjrav@comcast.net
From: "Mark Ravinski" <mjrav@comcast.net>
References: <list-4577020@logan.com>
Subject: Re: [LML] Re: Upgrade your ignition and help LOBO
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Bill,
I think you need some German engineering.  Klaus at Lightspeed sells high
strength aluminum bronze bushings for $15 each.  These work great.  They are
much stronger than the brass bushings and will save you from going to
Lycoming for new cylinders.

Mark


----- Original Message ----- 
From: "Bill Harrelson" <n5zq@verizon.net>
To: <lml@lancaironline.net>
Sent: Friday, November 12, 2010 4:41 PM
Subject: [LML] Re: Upgrade your ignition and help LOBO


> Mike,
>
> I'm using the E-Mag harness and auto plugs. I like the auto plugs but
don't
> particularly like the brass adaptors that they screw into.  I'll probably
go
> back to aviation plugs at some point. I understand that you can purchase
new
> experimental cylinders from Lycoming with the plug ports bored for auto
> plugs. I'd go for that.
>
> Bill Harrelson
> N5ZQ 1,850 hrs
> N6ZQ  IV under construction
>
>
>
> -----Original Message----- 
> From: Reinath, Michael S. (ARC-AM)
>
> Hey Bill,
>
> Which harness are you using and what type of plug?
>
> Mike Reinath
> LNC2 360
> San Jose, CA
>
>
> --
> For archives and unsub
http://mail.lancaironline.net:81/lists/lml/List.html


----------------------------------------------------------------------------
----


No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.869 / Virus Database: 271.1.1/3251 - Release Date: 11/11/10
14:34:00