Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Fri, 12 Nov 2010 07:34:14 -0500
Message-ID: <redirect-4576325@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=206.46.173.9; envelope-from=n5zq@verizon.net
From: "Bill Harrelson" <n5zq@verizon.net>
References: <list-4575367@logan.com>
In-reply-to: <list-4575367@logan.com>
Subject: Re: [LML] Re: Upgrade your ignition and help LOBO
MIME-version: 1.0
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=response
Content-transfer-encoding: 7bit
Importance: Normal

Hi Matt,

I run two P-Mags on our 320. I think that the self powered "P" model is the 
only model they are producing now. Most folks figured out that for a very 
few bucks more you could have an independent, self powered electronic 
ignition and nobody was buying the unpowered model. Installation was pretty 
straight forward, nothing tricky, just follow the directions. You can mount 
the units at any angle you want, you don't need to turn them to time them. 
When you've got it bolted on at whatever angle is most convenient for you 
you put the prop at TDC, enter setup mode and "tell" the P-mag that this is 
TDC by applying slight pressure on a tube. Once the unit knows where TDC is, 
you're done.

I see no advantage to one E-Mag and one magneto other than cost. In cruise, 
the E-Mag will always fire before the mag and by the time the mag fires 
there will be very little charge left to light. Since the P model is self 
powered I can't see any advantage to carrying a mag. Total electrical 
failure has no effect on the P-Mag. As a matter of fact, this is part of my 
runup: turn off power to both ignitions and do the standard "mag" check. 
This confirms that each unit is operating under its own power.

Again, I have no connection to E-Mag. I use and like their product but have 
no other ties to them.

Bill Harrelson
N5ZQ 320 1,850 hrs
N6ZQ  IV under construction


----Original Message----- 

Bill,
I am considering going with the E-Mags.  Can you provide some details
on your use in your 320?  Are you using two of the the P-version
Emags, or one regular and one P-version?  Was installation as easy as
they indicate on their website?  I'm kicking around the idea of one
E-Mag and one magneto - thoughts?  Anything else that you can think of
about the E-Mags would be helpful.
Thanks,
Matt McManus
LNC2 360