X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Tue, 09 Mar 2010 10:28:07 -0500 Message-ID: X-Original-Return-Path: Received: from SMTP15.europarl.europa.eu ([136.173.62.228] verified) by logan.com (CommuniGate Pro SMTP 5.3.4) with ESMTP id 4160083 for lml@lancaironline.net; Tue, 09 Mar 2010 10:22:37 -0500 Received-SPF: none receiver=logan.com; client-ip=136.173.62.228; envelope-from=dino.quaresimin@europarl.europa.eu Received: from EMAILLUXSV32.ep.parl.union.eu (unverified) by SMTP15.europarl.europa.eu (European Parliament) with ESMTP id for ; Tue, 9 Mar 2010 16:21:59 +0100 X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01CABF9C.42B0D30B" Subject: RE: [LML] starter drive problem TSIO550 X-Original-Date: Tue, 9 Mar 2010 16:21:58 +0100 X-Original-Message-ID: In-Reply-To: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: [LML] starter drive problem TSIO550 Thread-Index: Acq/fq8L1u9o09/lT+GTV7WcSxk56gAGsx/g References: From: "QUARESIMIN Dino" X-Original-To: "Lancair Mailing List" This is a multi-part message in MIME format. ------_=_NextPart_001_01CABF9C.42B0D30B Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I had the same problem with the starter adapter on a Cont IO-550N This happend at 50 hours and then again at 450 hours In order to replace the adpter I proceded as follow : Hoist the engine Removed the 4 bolts attaching the engine mount to the firewall =20 Remove the bolts attaching the nosedoor to the engine mount Pull the engine 2 inches forward from the firewall Remove the starter side way Remove the adapter (slip it off aft side) Then Install the new adapter =20 Best luck Dino QUARESIMIN LEG2 - LX-DIN Happily flying in Luxembourg dino.quaresimin@europarl.europa.eu =20 =20 ________________________________ From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of cfi@instructor.net Sent: 09 March 2010 12:35 To: lml@lancaironline.net Subject: [LML] starter drive problem TSIO550 =09 =09 I know there was some discussion a while back about starter drive issues, but I can't find any specifics. I've developed a problem where the starter slips and won't engage, so I suppose I'm a victim of the TCM problem at 400hr TT. Is is possible to remove the adapter without moving the engine forward? I have an A/C pump on the back of the engine too, so it's very packed behind the engine. I'm not even sure what to remove. Anyone have some ideas to make this as easy as possible? Any photos? =20 Thanks =09 Ron=20 =09 ------_=_NextPart_001_01CABF9C.42B0D30B Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

I had the same problem with the starter adapter = on a Cont=20 IO-550N

This happend at 50 hours and then again = at 450=20 hours

In order to replace the adpter I = proceded as=20 follow :

Hoist the engine

Removed the 4 bolts attaching the engine = mount to the=20 firewall

Remove the bolts attaching the nosedoor to the = engine=20 mount

Pull the engine 2 inches forward from the=20 firewall

Remove the starter side way

Remove the adapter (slip it off aft=20 side)

Then Install the new = adapter

Best luck

Dino QUARESIMIN

LEG2 - LX-DIN

Happily flying in = Luxembourg

dino.quaresimin@europa= rl.europa.eu

From: Lancair Mailing List=20 [mailto:lml@lancaironline.net] On Behalf Of=20 cfi@instructor.net
Sent: 09 March 2010 = 12:35
To:=20 lml@lancaironline.net
Subject: [LML] starter drive problem=20 TSIO550

I know there was some discussion = a while=20 back about starter drive issues, but I can't find any specifics. = I've=20 developed a problem where the starter slips and won't engage, so I = suppose I'm=20 a victim of the TCM problem at 400hr TT. Is is possible to = remove the=20 adapter without moving the engine forward? I have an A/C pump on = the=20 back of the engine too, so it's very packed behind the engine. = I'm not=20 even sure what to remove. Anyone have some ideas to make this as = easy as=20 possible? Any photos?
Thanks

Ron=20

------_=_NextPart_001_01CABF9C.42B0D30B--