Mailing List lml@lancaironline.net Message #54289
From: Bryan Wullner <vonjet@gmail.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: Automatic header tank feeder
Date: Fri, 22 Jan 2010 17:08:55 -0500
To: <lml@lancaironline.net>

I have the old hi/low optical sensors in my 360. I have new facet pumps running the system too. I have a complete wiring diagram of my system and the wiring and data sheet on the optical sensor.
I'm going to post it to my website for others to copy soon. If you want the address email me.

Bryan

On Jan 22, 2010 7:36 AM, "Novelli" <ppxsn@novelli.ind.br> wrote:

Try http://www.pillarpointelectronics.com/history.html . They were Pillar Point Avionics. As PPAv they produced a device that do what you want but I think they discontinued it. I have one in my 320 and works fine.

 

       Sílvio Novelli

Lancair 320 - PP-XSN

    +55 (14) 3841-2337

 

From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Tom Anderson
Sent: quinta-feira, 21 de janeiro de 2010 19:53
To: lml@lancaironline.net

Subject: [LML] Automatic header tank feeder

 

My 360 is getting ready for some repairs that includes fixing defective fuel gauges and recalibrating my totalizer. While I’m at it, I’d like to add a switching device that would read the header tank level and automatically activate the fuel transfer pumps when the header tank level drops below, say, 4 gallons and then shuts it off at a header tank reading of about 9 gallons. I saw a 2 ¼” display for such a unit on a friend’s Lancair, but he couldn’t recall where he got if from and doubted they were still available. Does anyone know if they are or what other options might be available? Thanks for any thoughts on this.

 

Tom, N360DB

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster