Posted for "Justin Hawkins" <JustinH@lancair.com>:

 1: Clean the pin hole with Acetone or MEK.
 
 2: Take RTV and fill over the pin hole.
 
 3: Clean with Acetone and or MEK again.
 
 4: Take a little RTV and smear it around the hole then take a very small
 piece of Peel Ply and place to the RTV and seal.
 
 5: Take a little RTV and smear it around the edges of the Peel Ply and
 let stand over night.
 
 This repair should last months if not years if done correctly.
 
 
 
 Justin Hawkins
 
 Lancair Airframe & Technical Support
 
 Lancair Int. Inc.
 
 250 SE Timber AVE
 
 Redmond, OR 97756
 
 justinh@lancair.com <mailto:justinh@lancair.com>
 
 541-923-2244 ext 121