I was wondering if any Legacy builders had any photos of how they routed
their engine/prop/mixture controls from the center console through the
firewall.  I did the Lancair firewall prep and they put the firewall pass
throughs in the upper left side (pilot) of the firewall.  The mixture cable
takes several sharp bends but ultimately works.  I'm having problems with
the throttle cable routing.  As it stands, I have the throttle and mixture
cables initially going under the avionics shelf, then penetrating the shelf
and arching up behind the canopy gas strut to the firewall.....pretty crazy.
There must be a better way.  Suggestions?