X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Mon, 19 Oct 2009 14:21:10 -0400 Message-ID: X-Original-Return-Path: Received: from smtp-auth-05.mx.pitdc1.expedient.net ([206.210.66.138] verified) by logan.com (CommuniGate Pro SMTP 5.2.16) with ESMTPS id 3891171 for lml@lancaironline.net; Mon, 19 Oct 2009 14:05:49 -0400 Received-SPF: none receiver=logan.com; client-ip=206.210.66.138; envelope-from=rpastusek@htii.com Received: from HTBOB001 (unknown [65.202.210.118]) by smtp-auth-05.mx.pitdc1.expedient.net (Postfix) with ESMTPA id 10CABE4CC9 for ; Mon, 19 Oct 2009 14:05:15 -0400 (EDT) From: "Robert Pastusek" X-Original-To: "'Lancair Mailing List'" References: In-Reply-To: Subject: RE: [LML] rear seatbelts for a IVP X-Original-Date: Mon, 19 Oct 2009 14:05:11 -0400 X-Original-Message-ID: <065f01ca50e6$b372dd30$1a589790$@com> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0660_01CA50C5.2C613D30" X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: AcpQvr0YqBTrBFDAR6K/iM6T0VJSYAAJsP3A Content-Language: en-us This is a multi-part message in MIME format. ------=_NextPart_000_0660_01CA50C5.2C613D30 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Colyn, I made the lap belt anchors removable so I could get the rear seat = bottom out without too much effort=85 (?) Not sure it serves that purpose very = well, but it=92s a cleaner installation in any case. I also installed a hard = point at the top of the seat back, where it joggles back to form the upper = part of the pressure bulkhead (Lancair IV-P). Used =BC=94 phenolic and carbon = cloth to make a strong anchor for a shoulder harness at that point. Interior not = yet complete, but this seems to work well=85although it=92s not been tested = for real=85 =20 Bob =20 From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of = Colyn Case at earthlink Sent: Monday, October 19, 2009 9:19 AM To: lml@lancaironline.net Subject: [LML] rear seatbelts for a IVP =20 Other than simple lapbelts, what have people used in the back seat of a = IVP? I'm just buying mine now. =20 Colyn =20 ------=_NextPart_000_0660_01CA50C5.2C613D30 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Colyn,

I made the lap belt anchors removable so I could get the rear seat = bottom out without too much effort… (?) Not sure it serves that purpose very = well, but it’s a cleaner installation in any case. I also installed a = hard point at the top of the seat back, where it joggles back to form the = upper part of the pressure bulkhead (Lancair IV-P). Used =BC” phenolic and = carbon cloth to make a strong anchor for a shoulder harness at that point. = Interior not yet complete, but this seems to work well…although it’s = not been tested for real…

Bob

From:= Lancair = Mailing List [mailto:lml@lancaironline.net] On Behalf Of Colyn Case at = earthlink
Sent: Monday, October 19, 2009 9:19 AM
To: lml@lancaironline.net
Subject: [LML] rear seatbelts for a IVP

Other than simple lapbelts, what have people used in the back seat of a = IVP?

I'm just buying mine now.

Colyn<= o:p>

------=_NextPart_000_0660_01CA50C5.2C613D30--