|
I also have the Matco parking brake in my ES. I ran a cable over to the lower left corner of the panel near the door so I can climb out with the brake on, get the tow bar attached, then release the parking brake by reaching through the door. Works well.
Mike Easley
Colorado Springs
In a message dated 10/13/09 13:57:48 Mountain Daylight Time, msteitle@gmail.com writes:
Greg,
I installed a parking brake on my ES and use it all the time. It is mounted on the right fuse, just forward of the panel. I didn't install a cable, so I have to press on the brakes with my feet while I lean over and turn the lever to lock the brakes. It ties into the two hydraulic brake lines that run down the right side. (The Legacy may be different.) I bought the parking brake unit from ACS.
Mark S.
On Tue, Oct 13, 2009 at 2:47 PM, Art Jensen <flycassutts@yahoo.com> wrote:
|
I don't have any parking brake on my legacy.
From: Greg Ward <gregw@onestopdesign.biz>
Subject: [LML] parking brake
To: lml@lancaironline.net
Date: Tuesday, October 13, 2009, 11:13 AM
I am currently finishing up on the hydraulics, and was curious how parking brakes have been approached on Legacy's.
Greg Ward
Legacy N178RG 20B in progress
|
|