Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Tue, 21 Jul 2009 08:21:06 -0400
Message-ID: <redirect-3766980@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=74.125.78.26; envelope-from=acropilot@gmail.com
DomainKey-Signature: a=rsa-sha1; c=nofws;
        d=gmail.com; s=gamma;
        h=message-id:from:to:content-type:content-transfer-encoding
         :mime-version:subject:date:x-mailer;
        b=FLuhUIkY1R+nSbYRs9Bl/TTelSqTnTfntMurlpVWwgxjUD6UQd+50hlMzW4aNvDnuW
         iSfqtw6flTJjRcfW2JnXR+8dipMnXIgR3MHxVZ7DU0U7DYGozyX0pdRSPUE8Fv9DmvGo
         QIZ7wGUOWSOqgBjvAunAKFL+/HLIrTaWENHnU=
From: Tony Moradian <acropilot@gmail.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
Content-Transfer-Encoding: 7bit
Mime-Version: 1.0 (Apple Message framework v935.3)
Subject: Legacy #336 for sale

Hello All,

After much deliberation, i have decided to sell my fast build kit  
serial# 336 (Carbon Cowls).  I picked up the kit from the factory in  
the middle of April 2009.  We did the one week program plus the  
Canopy.  The following was done at the factory:

1.  Canopy
2.  Center section mated to the fuselage
3.  Wing skins closed
4.  Cut our Rudder
5.  Installed and mated the horizontal stabilizer

I also have the following already purchased and will include it as  
part of the sale:

1.  Starflight pedals in anodized bue (dual pedals)
2.  Speed Mod Kit by aerochia (Complete)
	i.  Wing leading edge
	ii.  Horizontal Leading edge
	iii.  Fuselage side panel
	

The only work done on the airplane has been to fit the inboard and  
outboard gear doors.  The fuselage sits on a rotisserie.  I am located  
at WHP Whiteman airport near Van Nuys, CA.  All work done was in  
factory jigs.  Have pictures of all measurements before parts were  
bonded.

$68,000 USD

Tony: 310-628-0724
acropilot@gmailcom