Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Fri, 17 Jul 2009 14:10:49 -0400
Message-ID: <redirect-3762962@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=69.128.73.170; envelope-from=sbuller@emmett.org
Content-class: urn:content-classes:message
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Subject: RE: [LML] Re: Retractable Step IV-P
In-Reply-To: <list-3761816@logan.com>
Thread-Topic: [LML] Re: Retractable Step IV-P
Thread-Index: AcoGU2rAQ8zIG2OwQr2QEwMt+jW+JgAliYWA
From: "Steve Buller" <sbuller@emmett.org>

That is a great idea Art... Care to share more detailed instructions?
You going to be at OSH with your bird?
Steve
269-209-5841=20

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Art Bertolina
Sent: Thursday, July 16, 2009 4:24 PM
To: lml@lancaironline.net
Subject: [LML] Re: Retractable Step IV-P

for builders who have not installed the step yet. Move the step back
approximately 10" and bolt it to the gear box about 5deg. back from
vertical. I use an electric actuator to move the step up and down. So
far it works great.
Art
----- Original Message -----
From: "Jeffrey Liegner, MD" <liegner@embarqmail.com>
To: <lml@lancaironline.net>
Sent: Thursday, July 16, 2009 10:19 AM
Subject: [LML] Re: Retractable Step IV-P


> Early on, I said "screw it" and locked the step in the permanent down=20
> position.  I had heard too many adverse stories, and had too much
concern=20
> about the cable fraying and getting emmeshed into the gear pinon,=20
> interfering with gear down.
>
> Jeff L
>
>
>>"I've done it alone many times, several times just trying to figure a
way=20
>>to make the "retractable" step actually work, before I finally gave up
and=20
>>disconnected the cable and just locked it down."
>>
>
> --
> For archives and unsub=20
> http://mail.lancaironline.net:81/lists/lml/List.html
>=20


--
For archives and unsub
http://mail.lancaironline.net:81/lists/lml/List.html