Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Thu, 16 Jul 2009 16:24:24 -0400
Message-ID: <redirect-3761819@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=209.86.89.65; envelope-from=artbertolina@earthlink.net
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=dk20050327; d=earthlink.net;
  b=Csvgb3AVJnT3QBxKbP1OEdSvoRJhBjOTRfBTTBM3RmMWAcZ3plnTJi+SSnslaOPI;
  h=Received:Message-ID:From:To:References:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE:X-ELNK-Trace:X-Originating-IP;
From: "Art Bertolina" <artbertolina@earthlink.net>
References: <list-3761567@logan.com>
Subject: Re: [LML] Re: Retractable Step IV-P
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=response
Content-Transfer-Encoding: 7bit

for builders who have not installed the step yet. Move
the step back approximately 10" and bolt it to the gear
box about 5deg. back from vertical. I use an electric
actuator to move the step up and down. So far it works
great.
Art
----- Original Message ----- 
From: "Jeffrey Liegner, MD" <liegner@embarqmail.com>
To: <lml@lancaironline.net>
Sent: Thursday, July 16, 2009 10:19 AM
Subject: [LML] Re: Retractable Step IV-P


> Early on, I said "screw it" and locked the step in the permanent down 
> position.  I had heard too many adverse stories, and had too much concern 
> about the cable fraying and getting emmeshed into the gear pinon, 
> interfering with gear down.
>
> Jeff L
>
>
>>"I've done it alone many times, several times just trying to figure a way 
>>to make the "retractable" step actually work, before I finally gave up and 
>>disconnected the cable and just locked it down."
>>
>
> --
> For archives and unsub 
> http://mail.lancaironline.net:81/lists/lml/List.html
>