X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Sat, 13 Sep 2008 23:16:34 -0400 Message-ID: X-Original-Return-Path: Received: from [64.98.42.106] (HELO smtprelay.b.hostedemail.com) by logan.com (CommuniGate Pro SMTP 5.2.8) with ESMTP id 3131214 for lml@lancaironline.net; Sat, 13 Sep 2008 23:00:35 -0400 Received-SPF: none receiver=logan.com; client-ip=64.98.42.106; envelope-from=rmitch1@hughes.net Received: from filter.hostedemail.com (b-bigip1 [10.5.19.254]) by smtprelay05.b.hostedemail.com (Postfix) with SMTP id 68C461DA0F for ; Sun, 14 Sep 2008 02:59:58 +0000 (UTC) X-SpamScore: 1 X-Spam-Summary: 2,0,0,3b3b1932ff989441,ab367f0661a3e469,rmitch1@hughes.net,,RULES_HIT:10:75:355:379:539:541:542:599:960:962:967:972:973:980:988:989:1021:1029:1155:1160:1189:1221:1260:1308:1309:1313:1314:1345:1359:1436:1437:1515:1516:1517:1521:1535:1544:1575:1588:1589:1592:1594:1685:1691:1711:1730:1776:1792:2194:2199:2525:2528:2551:2553:2559:2563:2682:2685:2693:2857:2859:2902:2903:2917:2933:2937:2939:2942:2945:2947:2951:2954:3022:3027:3352:3585:3586:3636:3865:3866:3867:3868:3869:3870:3871:3872:3934:3936:3938:3941:3944:3947:3950:3953:4048:4118:4321:4379:5007:6117:6248:6300:7576:7679:7688:7746:8518:8583:8603:8957:9010:9025:9028:9040,0,RBL:none,CacheIP:none,Bayesian:0.5,0.5,0.5,Netcheck:none,DomainCache:0,MSF:not bulk,SPF:,MSBL:none,DNSBL:none Received: from SonyVaioSZ (dpc6935104091.direcpc.com [69.35.104.91]) (Authenticated sender: rmitch1@hughes.net) by omf05.b.hostedemail.com (Postfix) with ESMTP for ; Sun, 14 Sep 2008 02:59:52 +0000 (UTC) From: "Robert Mitchell" X-Original-To: "'Lancair Mailing List'" References: In-Reply-To: Subject: RE: [LML] Sticky Stuff Dispenser Cleaning X-Original-Date: Sat, 13 Sep 2008 21:59:46 -0500 X-Original-Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000F_01C915EC.0D2A7040" X-Mailer: Microsoft Office Outlook 11 Thread-Index: AckVLzJmg7NWjYXqRSK0tvIwAqJ0AAAoiOLg X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6001.18049 X-session-marker: 726D6974636831406875676865732E6E6574 This is a multi-part message in MIME format. ------=_NextPart_000_000F_01C915EC.0D2A7040 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Unscrew each nozzle, there is a check valve ball and spring underneath. I soaked them in acetone and replaced. Then, after reassembly I pumped acetone thru the pump (got out some sticky black stuff). Finally I replaced the reservoirs. Works great now. Don't forget to weigh a couple of pumps to make sure it is dispensing the correct ratio. Throw this initial test batch away in case it is contaminated with acetone. I don't think acetone will affect the reservoirs, unless they have changed the material. Bob Lancair 56SH _____ From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Will Holden Sent: Friday, September 12, 2008 6:28 PM To: lml@lancaironline.net Subject: [LML] Sticky Stuff Dispenser Cleaning Hello, everyone. I bought a used epoxy pump a few years ago and now I am ready to start using it. I got new reservoirs for the epoxy and hardener and I have cleaned the outside with denatured alcohol. Is there anything else I need to clean? How can I ensure everything is clean to put new epoxy into it? I appreciate any advice! Will ------=_NextPart_000_000F_01C915EC.0D2A7040 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

Unscrew each nozzle, there is a = check valve ball and spring underneath. I soaked them in acetone and replaced. Then, after reassembly I pumped acetone thru the pump = (got out some sticky black stuff). Finally I replaced the reservoirs. = Works great now. Don’t forget to weigh a couple of pumps to make = sure it is dispensing the correct ratio. Throw this initial test batch = away in case it is contaminated with acetone. I don’t think acetone = will affect the reservoirs, unless they have changed the = material.

Bob

Lancair = 56SH

From: = Lancair Mailing List = [mailto:lml@lancaironline.net] On Behalf Of Will Holden
Sent: Friday, September = 12, 2008 6:28 PM
To: = lml@lancaironline.net
Subject: [LML] Sticky = Stuff Dispenser Cleaning

Hello, everyone. I bought a used epoxy pump a = few years ago and now I am ready to start using it. I got new = reservoirs for the epoxy and hardener and I have cleaned the outside with denatured alcohol. Is there anything else I need to clean? How can I = ensure everything is clean to put new epoxy into it? I appreciate any = advice!

Will

------=_NextPart_000_000F_01C915EC.0D2A7040--