<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

In the LC235 building manual, in figure 191 Page 198 rev (6/86) a 3/16" shim is shown under the forward edge of the rudder when bonding the 2 halves together.  Does this shim extend all 48" of the length of the rudder or is it just placed under the lower edge at the 8" point from the bottom (if so it would seem like a set of shims to support the rudder at several points during the bonding process would be more desireable)

Thanks in advance.

-Ed Sikora

LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.