Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Tue, 10 Jun 2008 20:26:25 -0400
Message-ID: <redirect-2962313@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=68.168.78.199; envelope-from=dfs155@roadrunner.com
From: "Dan Schaefer" <dfs155@roadrunner.com>
Subject: panel markings
MIME-Version: 1.0
Content-Type: text/plain; format="flowed"; charset="iso-8859-1"; reply-type="original"
Content-Transfer-Encoding: 7bit

Terrance,

FWIW, I used the dry transfer (rub-on) lettering on my 235, and even though 
I put what I thought would be a protective coating of clear Krylon over 
them, some of the labels have almost completely worn away  - particularly on 
the most used switches. Granted, the airplane has been in fairly constant 
use since first flight in '93 and has about 1000 hours on it but the panel 
really has become a bit ratty as a result.

A good thing about the dry transfers is the ability to re-label something if 
necessary - I've changed a few things over time that required different 
label text and it wasn't too difficult to do. Not all that easy if the label 
is engraved - not sure about a silk screened text either, once the panel is 
installed.

A friend had the labels for his RV-6 made with the routed plastic placques 
(not sure what the process is called but it's where one color surface is 
engraved exposing a different color layer underneath). Looks OK but the 
adhesive on the back-side can fail occasionally if the cockpit gets really 
hot. Of course, with this method, labels can also be changed quite easily if 
required.

Regards,

Dan Schaefer
LNC2     N235SP 


-- 
I am using the free version of SPAMfighter for private users.
It has removed 239 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len