X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Tue, 04 Dec 2007 09:20:22 -0500 Message-ID: X-Original-Return-Path: Received: from mta15.adelphia.net ([68.168.78.77] verified) by logan.com (CommuniGate Pro SMTP 5.2c1) with ESMTP id 2555263 for lml@lancaironline.net; Tue, 04 Dec 2007 08:37:31 -0500 Received-SPF: pass receiver=logan.com; client-ip=68.168.78.77; envelope-from=glcasey@adelphia.net Received: from [75.82.212.14] by mta15.adelphia.net (InterMail vM.6.01.05.04 201-2131-123-105-20051025) with ESMTP id <20071204133652.NZXZ22833.mta15.adelphia.net@[75.82.212.14]> for ; Tue, 4 Dec 2007 08:36:52 -0500 Mime-Version: 1.0 (Apple Message framework v752.2) In-Reply-To: References: Content-Type: multipart/alternative; boundary=Apple-Mail-37--575121158 X-Original-Message-Id: From: Gary Casey Subject: Re: Removing ram air duct - Legacy X-Original-Date: Tue, 4 Dec 2007 05:36:50 -0800 X-Original-To: "Lancair Mailing List" X-Mailer: Apple Mail (2.752.2) --Apple-Mail-37--575121158 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Most excellent work, Fred! It's a work of art and should be effective as well. Gary > .... > Photos are shown below. The part was made from a foam master > which was then covered with fibreglass, slit in half horizontally, > foam chewed out, cleaned up, and then bonded together with the > flapper valve captured inside. The flapper valve shaft is made > from 1/4 inch hydraulic tubing. It took a lot of fussing to get > the flapper valve to seal without leakage (no obvious daylight when > the flapper is seated). > > > Fred Moreno --Apple-Mail-37--575121158 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=ISO-8859-1 Most excellent work, Fred! =A0It's a work of art and should be effective = as well.
Gary
....

=A0Photos are = shown below. =A0The part was made from a foam master which was then = covered with fibreglass, slit in half horizontally, foam chewed out, = cleaned up, and then bonded together with the flapper valve captured = inside.=A0 The flapper valve shaft is made from 1/4 inch hydraulic = tubing. =A0It took a lot of fussing to get the flapper valve to seal = without leakage (no obvious daylight when the flapper is = seated).

=A0

Fred = Moreno

= --Apple-Mail-37--575121158--