Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Wed, 28 Nov 2007 15:57:36 -0500
Message-ID: <redirect-2509529@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=204.127.217.101; envelope-from=bbradburry@bellsouth.net
From: "Bill Bradburry" <bbradburry@bellsouth.net>
References: <list-2505828@logan.com>
In-Reply-To: <list-2505828@logan.com>
Subject: RE: [LML] LNC2 Engine Mounts
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Thread-Index: AcgwZUZXKwdi5GrgQ/GUeYxc5YvtVAA6p3lA

I have a set of four Barry mounts, part no. 94150-41, in the original
boxes...Never used.  I also have the bolts and metal stopnuts to go with
them.  I will not be using these parts.

If anyone wants them they can have them for $250 and I will pay shipping.  I
will also throw in the bolts and nuts if you want.

Thanks,
Bill B 

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Tom
Thibault
Sent: Monday, November 26, 2007 2:48 PM
To: lml@lancaironline.net
Subject: [LML] LNC2 Engine Mounts

According to Aircraft Spruce, the Barry Part No. for the Lyc. IO-360 used in
an LNC2 is 94150-41.  This is what I have and they need replacement at 700
hrs and 8 years in service.  A/C Spruce wants about $420 per engine, while
the 94150-40 is about $236. Apparently there are other choices such as Lord,
VIP and perhaps other manufacturers, but am not real sure which are
"equivalent".

The AerocraftParts catalog shows the following, but does not recommend which
for which installation.  Notice that this lists both the 94150-41 and the
94150-40.

_____________________________________
Vibration Isolators
These are used on all standard Lancair dynafocal engine mounts and are the
small (2-1/4") diameter type. Each configuration is best suited to a
specific engine/prop combination which relates to firmness. Hardware needed:
4 AN7-35A bolts with 4 AN363-720 all metal stopnuts.

Part # Price Each
94150-01 $50.00
94150-40 $59.00
94150-41 $95.00
______________________________________

Has anyone used something other than the Barry 94150-41 for this engine and
what were your results?

Thanks,

Tom Thibault

--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html