|
|
Better than my ASCII art - see Lancair service bulletin 54:
http://www.lancair.com/Main/service_bulletins/SB054.pdf
Two things to check:
1) I would expect the steel landing gear weldment (GM1?) to bend before
the aluminum forging. Check for any bending of the weldment by laying
a straightedge against the top of the steel tube inside the wing.
I'll try an ASCII drawing... Look for bends at the asterisks (*)
* *
===============
\\ ||
\\ ||
\\ ||
\\||
\||
||
||
|
|