|
|
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
<< Lancair Builders' Mail List >>
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
You simply capture the shank of a male rod end bearing between
the cable adjusters and drill 3/16" holes through the shank of the rod end
bearing (holes are already pre-drilled in the cable adjusters). Oops!! I should have written FEMALE rod end bearing. I'm writing all this
from recollection and don't have references handy, but I believe the rod end
bearing to use is an HFE-3.
Bill Rumburg
N403WR (Sonic bOOm)
LML website: http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore: http://www.buildersbooks.com/lancair
Please send your photos and drawings to marvkaye@olsusa.com.
|
|