Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Tue, 06 Mar 2007 15:00:27 -0500
Message-ID: <redirect-1905447@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=70.62.14.124; envelope-from=rsimon@ustek.com
Content-class: urn:content-classes:message
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Subject: RE: [LML] Re: Ground-plane
Thread-Topic: [LML] Re: Ground-plane
Thread-Index: AcdgJQhPL+M7abp3Qhyp2olo8nPZVQAAZGaA
From: "Lancair" <lancair@USTEK.COM>

 I ordered mine from Technical Fibre Products.  The material was shipped
from the UK but they do have offices in the US.  The company making the
basic metallized graphite is Electro Fiber Technologies but Technical
Fibre Products sells the veils.  The grade that I used is "Ni coated
carbon - X linked binder, 20g/sq.m." =20

Contact:=20
John Haaland
TFP Inc.
2nd Floor East, 259 Route 17K
Newburgh NY 12550 USA
Tel: +1 845 567 9066 x 224
Fax: +1 845 567 9524
Email: usa.sales@techfibres.com

Robert M. Simon
ES-P N301ES


-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Bryan Burr

So where can a person purchase all of the fancy materials that have been
mentioned in the posts of the last few days?  Not only do some of the
recommendations appear complicated, they seem out of reach from us
Aircraft Spruce shoppers. =20
Bryan J. Burr,  N132BB

"I chose Ni plated graphite fiber fabric to test.  We laid up plaques
and sent to an open field site for evaluation.  The results were very
similar in effectiveness to sheet aluminum."